Technoplat CS 707 PVS

TECHNOPLAT-CS 707 PVS
The automatic Technoplat machines represent the innovative and flexible solution to fully automatic pallet wrapping. The operator places the load on the turntable, stars -off cycle by remote con trol and, after having accomplished the wrapping cycle in an automatic manner, removes the pallet. The innovative Film Clamping & Cutting Unit with integrated spread ensures accurate hooking; full respect of the safety rules is guaranteed in every operating condition.
The pallet can be positioned by fork lift truck or pallet jack and, thanks to the base plate 92 mm. high, Technoplat has a high operating flexibility.

Features

Braccio-spalmatore-dett-4 CLAMPING, CUTTING AND SPREADING SYSTEM
The innovative clamp and cut unit is based on a pneumatic system and delivers high precision and reliable performances by executing each operation step by step. The integrated spreading unit on the CS machines is able to spread the film at the end of each wrapping cycle and ensures the absence of any tail. The clamp unit allows the machine to be always ready for the next cycle. All these operations can run manually.
Pannello1-3 CONTROL PANEL
The control panel is equipped with a practical alert system that detects and locate where maintenance/action might be needed.
CONTROL DESCRIPTION
A= STOP
B= START
C= RESET
D= CARRIAGE DESCENT
E= PRESSURE UP/DOWN
F= CARRIAGE STOP
PARAMETERS DESCRIPTION
Table rotation speed
Film tensioning
Carriage up/down speed
Film tension upward/downward
Bottom wrap andtop wrap
Film pre-stretch
Photocell delay
CYCLE DESCRIPTION
Top sheet cycle
Pressure cycle
4 programswith parameters defined by the operator
CarrelloPVS-170x270-8 PVS CARRIAGE
Independent dual-drive pre-stretch roller carriage with pre-stretch ratio adjustment from 0 – 400%. Film deposit force onto the load can be adjusted on the panel and controlled by patented electronic device. “QLS” (quick load system) for fast film loading.
telecomando REMOTE CONTROL KIT
The CS is equipped with a remote control unit
that allows the operator to start the wrapping cycle
without getting of theforklift.

Technical specifications

TECHNOPLAT CS 707 PVS-Automatic turntable with clamp-cut and spreading unit
Carriage PVS: Independent dual-drive pre-stretch roller carriage
Machine Characteristics
Plate diameter 1650 mm
Turntable rotation speed: 4-12 rpm
Forklifting Front and Rear
Power supply voltage 230 Volt 1 Ph – 50/60 Hz
Installed power 3.2 kW
Pre-stretch ratio 0-300%
Phase stopping (+/-20 mm)
Soft start STD
Remotely control cycle start STD
Automatic clamp cut and spreading unit STD
Characteristics of the product to be wrapped
Maximum dimensions (LxW) 1000 x 1200 mm 
Maximum useful height: 2200 mm
Maximum load weight: 2000 Kg
Film spool characteristics
Max. external diameter (D): 300 mm
Film spool height (h): 500 mm
Film thickness: 17-35 µm
Internal diameter (d): 76 mm
Max. weight: 20 kg

Video